近年国际静电论文(有全文)001-100

1 Electrostatic voltmeter and fieldmeter measurements on GMR recording heads
2 Electrostatic hazards of explosive, propellant and pyrotechnic powders
3 Proceedings of 1994 IEEE Industry Applications Society Annual Meeting
4 Investigations of industrial electrostatic hazards performed by Wolfson Electrostatics
5 Direct electrostatic levitation and propulsion
6 A Lagrangian approach for electrostatic analysis of deformable conductors
7 Conference Record of the IEEE Industry Applications Society Annual Meeting (Cat. No.89CH2792-0)
8 Designing an undergraduate course in static electricity for engineering technology students
9 Design and performance evaluation of linear and rotary surface-driven electrostatic microactuators
10 Finite elements for electrostatics
11 The physical and geometrical basis of electrostatics
12 The electrostatic properties of insulating sheets close to a conductor: a review
13 Electrostatic levitator for hard disk media
14 Proceedings of IEEE Industry Application Society Annual Meeting
15 Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting
16 Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat.
17 Distributed electrostatic micro actuator
18 Fundamental characteristics of electrostatic wafer chuck with insulating sealant
19 Optimization of electrostatic separation processes using response surface modeling
20 Advantages of electrostatic micromotor and its application to medical instruments
21 Particle migration in electrostatic precipitators
22 Electrostatic of sound components: analytical results, simulation and experimental validation of the parasitic capacitance
23 Automated extraction of capacitances and electrostatic forces in MEMS and ULSI interconnects from the mask layout
24 Simultaneous analysis of particle size and electrostatic charge distribution of powder with high accuracy and precision, and its applications to electrostatic processes
25 Discussion on electric parameters of standard for anti-electrostatic floor
26 Electrostatic chuck with a thin ceramic insulation layer for wafer holding
27 High-voltage electrode position: a key factor of electrostatic separation efficiency
28 Fundamental characteristics of electrostatic wafer chuck with insulating sealant
29 Electrostatic ignition hazards from flexible intermediate bulk containers (FIBCs) with materials of minimum ignition energies down to 0.12 mJ
30 Calculation of corona onset voltage for duct-type precipitators [electrostatic devices]
31 The modelling of pulse charge injection within a powder flow system
32 The modeling of electrostatic forces in small electrostatic actuators
33 Electrostatic servo system for multi-axis accelerometers
34 Convergence properties of relaxation versus the surface-Newton generalized-conjugate residual algorithm for self-consistent electromechanical analysis of 3-D micro-electro-mechanical structures
35 Multiresolution skeletonization an electrostatic field-based approach
36 Electrostatic force analysis of electrostatic levitation system
37 The use of finite element field analysis in investigating industrial electrostatic hazards
38 Conference Record of 1998 IEEE Industry Applications Conference. Thirty-Third IAS Annual Meeting
39 Electrostatic build up on metal balls due to sliding contact with insulating materials, and how to reduce it with carbon-fiber reinforced plastics-electrostatic discharge in pachinko parlors
40 Electrostatic levitator for hard disk media
41 A surface micromachined electrostatic ultrasonic air transducer
42 A note on the possible electrostatic disruption of bacteria
43 Explosion hazards due to electrostatic charge accumulation on layer of adhesive powder
44 Malfunctions of high impedance circuits caused by electrostatic discharges
45 Application of electrostatic undulators for acceleration of intense ion beams
46 A new electrostatic actuator providing improved stroke length and force
47 Performance of Polywell inertial-electrostatic confinement for applications
48 Charging of insulating spheres in contact with an electrode affected by a mono-ionized field
49 Optics elements for modeling electrostatic lenses and accelerator components I. Einzel lenses
50 Inception of corona discharges in typical electrode configurations for electrostatic processes applications
51 Design of electrostatic fields in a new monocomponent system
52 Optimal high-voltage energization of corona-electrostatic separators
53 Corona inception in typical electrode configurations for electrostatic processes applications
54 Effective distribution functions for electrostatic waves in dusty plasmas with a dust-size distribution
55 Electrostatic effects on first pass transfer efficiency in the application of powder coatings
56 Computer-assisted experimental design for the optimization of electrostatic separation processes
57 Electrostatic suspension of dielectrics
58 Dielectric selection for a robotic electrostatic gripping device
59 Determination of the forces present in an electrostatic micromotor
60 Design studies of an electrostatic quadrupole channel for transport of a high-brightness H- beam and comparison with gas focusing
61 Measurement of the radiated electric fields from electrostatic discharge
62 A micro membrane pump with electrostatic actuation
63 Test of the transport properties of a helical electrostatic quadrupole and quasi-octupole
64 A high voltage solar cell array as an electrostatic MEMS power supply
65 Comparison of electrostatic and electromagnetic motors based on fabrication and performance criteria
66 Measurement of electric field due to electrostatic discharge using the Pockels effect
67 Electrostatically driven micro elastic joints
68 An electrostatic quality factor control for surface-micromachined lateral resonators
69 Imaging of atomic beam with the electrostatic atom lens
70 Efficiency of electrostatic separation of minerals from coal as a function of size and charge distributions of
71 A hybrid natural/artificial electrostatic actuator for tactile stimulation
72 The electrostatic fields and discharge hazards of insulating sheets close to a conductor: a review
73 Drift velocity of fine particles estimated from fractional efficiency measurements in a laboratory-scaled electrostatic precipitator
74 Stableness of electrical operation characteristics of electrostatic Lentoid Precipitator
75 Separation of fine dust with AC-energized electrostatic precipitators
76 Calculation of the electrostatic force acting on axisymmetric objects in nonuniform electric fields
77 The computation of electrostatic fields and space charge effects
78 Automated 3D mesh generation for efficient torque computation of electrostatic micromotors
79 Sparkover characteristics of prototype precipitator subjected to DC/pulse energization
80 An electrostatic accelerator FEL amplifier as a possible microwave power source for linear colliders
81 Electrostatic field-based detection of corners of planar curves
82 Geometrically non-linear finite element modeling of microelectromechanical structures subjected to electrostatic loading
83 Effect of PWM inverters on AC motor bearing currents and shaft voltages
84 Direct electrostatic levitation and propulsion of silicon wafer
85 Electrostatic deformable devices using surface micromachining
86 Fundamental study of an electrostatic chuck for silicon wafer handling
87 Electrostatic manipulator for 300-mm wafers
88 Mathematical modeling of the combined corona-electrostatic field of roll-type separators
89 Electrostatic separation of metals and plastics from granular industrial wastes
90 Molecular surgery of DNA based on electrostatic micromanipulation
91 Measures against electrostatic destruction of electronic devices at electronic equipment assembly shops
92 8250 electrostatic clamp performance
93 Electrostatic and electromagnetic surface wave theories compared
94 Detecting ESD events using a loop antenna
95 Electrostatic transportation of water droplets on superhydrophobic surfaces
96 Electrostatic charge generation associated with machinery component deterioration
97 Semipilot plant pulse energized cold-precharger electrostatic precipitator tests for collection of moderately high resistivity flyash particles
98 On fractional calculus and fractional multipoles in electromagnetism
99 Titanium nitride insulation for the deflector of superconducting cyclotrons
100 Electrostatic linear microactuator mechanism for focusing a CCD camera